Model 710 Tumbler

The Model 710 Tumbler was designed to clean parts that need to be moved or turned during the cleaning process to achieve proper cleaning. This unit is ideal for small screw machine parts that have blind holes or parts that tend to nest together and will benefit by the tumbling action during the cleaning cycle. This system can be furnished in several different configurations including with a wash, rinse, and dry cycles.

MODEL 710-720 SERIES

Tumbler Type Parts Washer

The Tumbler was designed to clean parts that need to be moved or turned for proper cleaning. This includes small screw machine type parts that have blind holes or tend to nest together and therefore must be moved to clean properly. Also small stamped parts that stick together because of oil on the parts or part configuration.

With a slow rotation of 3 rpm, parts move¬ment is very gentle, providing very little interaction of parts causing damage. Blind holes are cleaned as the gentle tumbling movement allows the high pressure washing action to clean inside the holes. With ADF's ability to build baskets and fixtures, a variety of parts can be washed which might seem to be too difficult for this versatile washer.

The aqueous wash solution, after washing the parts, flows through a 100 micron felt fil¬ter before returning to the reservoir. Therefore, chips, dirt and other contami-nates are trapped in the filter. In addition, a secondary high pressure cartridge filter is plumbed between the pump and the noz-zles, to provide further filtration. Elements are available in 3, 5, 10, 25 and 50 micron sizes.

There are many accessories available to allow the customer to tailor this washer to his needs. They include rinsing, drying, oil skimming and a variety of others which your distributor can detail for you.